AMP360-C

Product Overview

The AMP360-C is a 3-megapixel general-purpose MIPI vision camera module built on the SmartSens SC360AT image sensor. It outputs 1920×1536 at 30 fps, and the SC360AT’s LED flicker mitigation (LFM) and high dynamic range (HDR) capabilities effectively suppress flicker from artificial light sources such as traffic signals, vehicle lamps, and industrial indicator lights. Four lens options with different fields of view cover every scenario from a 60° narrow FOV to a 200° ultra-wide fisheye, designed for automotive, robotics, and industrial inspection applications.

Key Features

  • 120 dB Ultra-High Dynamic Range (Single-Frame HDR)

    120 dB ultra-high dynamic range resolves detail in both the brightest and darkest areas of a scene within a single frame.
    Technically, parallel capture across different gain channels and on-chip fusion complete within a single exposure cycle output the HDR image directly — avoiding the ghosting common in temporal multi-frame HDR, with no stitching artifacts from inter-frame motion in fast-moving scenes.
    HDR synthesis happens entirely in sensor hardware, consuming zero host compute.

  • Built-In Hardware ISP, Direct YUV Output

    A hardware ISP on the camera handles the entire image-quality pipeline on-chip — defective pixel correction, black-level correction, auto white balance, auto exposure, 3D noise reduction, color interpolation, gamma correction, sharpening, and more — saving significant compute on the embedded platform.
    The output end provides YUV image frames directly. As a universally supported cross-platform format, YUV means switching platforms requires no image re-tuning.

  • Large Pixels and Field-of-View Design

    Large pixel units give each photosite more light-collecting area, higher photon efficiency, and better SNR. In short-exposure (motion-smear prevention) or low-light (indoor/night operation) conditions, the sensor captures more light for images with less noise and more detail.
    The wide-angle lens provides broad horizontal and vertical fields of view — a single camera covers a wide perception area at close range.

  • Cross-Platform Driver Support

    Fast multi-platform driver integration: ALG Tech provides driver packages and documentation for rapid integration and secondary development.
    Supported platforms include mainstream embedded platforms at home and abroad, such as the D-Robotics RDK series, Raspberry Pi, Espressif, and NVIDIA.

 

Specification

Basic information
Product Model AMP1110-C360-T26-Z00-MMPC AMP1120-C360-T8A-Z00-MMPC
Dimensions 20mmx16mmx25.8mm 16mmx20mmx15mm
Resolution 1920（H） × 1536（V）
HFOV 106±3° 204±5°
VFOV 70.4±3° 170.4±3°
Focal length 3.13±5%mm 1.42±5%mm
F-number 1.4±5% 1.64±5%
Frame Rate 30fps
Output Fommat YUV422-8bit
Focus distance 2.5m 0.5m
Working distance 0.6m-∞ 0.1m-∞
Image sensor
Optical Format 1/2.44 inch CMOS
Pixel Size 3.0um
Shutter Type Rolling Shutter
Dynamic Range >120dB
Color Pattern RGGB
Connectivity and power supply
Transfer protocol MIPI CSI-2
Rated Voltage 3.3V
Rated Power 1W
Reliability
Working temperature 0°C ~ +45°C

Dimensions


Typical Applications

Outdoor Robots

Core Requirements：HDR, adapt to drastic changes in extreme light and dark environments

Unmanned Vehicles

Core Requirements：HDR, ultra-wide field of view for vehicle surround view

Industrial Automation Manufacturers

Core Requirements：Wide field of view, high-precision inspection, anti-flicker for light sources